precision gear Double Stage

谭书涛 | 创建时间:2010年06月21日 11:16 | 浏览: 20 | 评论: 0
标签: ele,TGP,mo

loading in progress... Please wait Planetary gearbox :  83 industrial products   82 products in   Planetary gearboxes 3 products in   Right angle gearboxes | Gear reducer | Gearmotor | Dc motor | Rotary encoders | Motion control | Servomotors | Electric motor |
| Linear motor | Servo control | Brushless servo motor | Planetary gearmotor | Helical gears | Helical gearbox | Spur gear |
... more definitions | Hydraulic winch | Servo gearbox | Linear stepper motor | Planetary reducer | Worm gearbox | Bevel gearbox | Right angle gear box | Gear box | Gear boxes | Gearboxes | Gearbox | Gearheads | Reducer gearbox | Geared motor | Pinion gearbox | Gearbox gears | Angle gearbox | Planetary epicyclic | Right angle gearbox | Gearhead planetary | Gear drive | Planetary gear | Planetary motors | Planetary motor | Power gearbox | Gearbox transmission | Planetary drives | Planetary drive | Gearbox torque | Backlash gearbox | Motion control motor | Planetary wheel | Planetary reduction | Spur gearbox | Servo motor control | Gearbox motor | Small gearbox | Miniature gearboxes | Planetary speed | Planetary power |

- -

82 products in   Planetary gearboxes Low backlash planetary gearbox VARVEL





VARVEL low-backlash planetary speed reducers, Series RG, are designed for two and three stages, with hardened and tempered steel housing and broached internal gear. Manufactured to latest ISO engineering design specifications the housing is checked by computer-aided structural analysis for deflection and stress distribution.

The planetary speed reducers RG are made with gears of carburized alloyed steel,robot motor, hardened and tempered; the planetary gear shafts of hardened and tempered steel; the input and output flanges of drawn aluminium (a micro version is manufactured without the output flange).

The universal motor coupling is available by the means of a clutch fitting and input flange and bush adapters.

The series RG is made in 4 sizes (RG050 - RG070 - RG090 - RG120), one and two stages, reduction ratios 3/1 to 100/1 and nominal output torque 12Nm to 220Nm.

The planetary gearboxes Series RG give a remarkable precision (angular backlash lower or equal than 8 minutes of arc for one stage and lower or equal than 12 minutes of arc for two stages) and quietness (lower than 70 dB-A for the sizes RG050, 070 and 090,GM25-370CA, and lower than 75 dB-A for the size RG120). Planetary gearbox Dunkermotoren





Planetary gearboxes (PLG) have the highest continuous torque capacity of all types of gearbox; at the same time they have a very compact form, low weight, and excellent efficiency. Self-centering planet gears ensure a symmetrical force distribution. The ring gear also forms the housing of the gearbox. The gearbox output shaft is supported in two ball bearings so that it can withstand high axial and radial loads. The gearboxes are customized, e.g. for use in especially low ambient temperatures,内齿轮, or as high-power gearboxes with reinforced output shafts, or with special lubricants for very long service life. Planetary gearbox DINAMIC OIL





In line or bevel planetary gearboxes with flange,SGM37, foot or pendular mounting in mobile or industrial applications. Nominal Output torques vary from 100 daNm to 130.000 daNm. Planetary gearbox SIPCO





SIPCO's TechnoGear? Planetary Reducers are for systems requiring a high degree of positioning accuracy and reliability. Our gears are fabricated of quality materials with ground tooth profiles and tested to ensure dependable and durable service for your specific applications. All of our planetary reducers are designed for low backlash, high dynamic loading with high output torque ratings in a small, compact modular package with 90-96% efficiency ratings.

SIPCO's TechnoGear? excellent quality Planetary Reducers are available with...

- Seven (7) standard sizes
- Ratios from 3 to 1296:1
- Input speeds up to 6,000 rpm
- A continuous torque from 90 to 8000 lb-in
- Low backlash from 15 to 3 arc minutes
- An emergency stop torque up to 17,齿轮箱,700 lb-in
- Keyless inputs to eliminate slippage
- Shaft input and heavy duty bearings
- In-line or right angle configuration
- Maintenance free-lubricated for life
- NEMA and IEC standards Planetary gearbox Zeitlauf GmbH antriebstechnik Co KG
NEMA





NEMA-Connection for Spur- and Planetary Gearheads ? NEMA 17

Please select your requested gear motor via click on the icon in the coordinate system (speed ? torque). Planetary gearbox maxon motor
GP 22 S / GP 32 S





GP 22 S and GP 32 S modular spindle drives.

Mechanical engineering often faces the task of converting rotational movements into powerful linear movements. The associated development costs can now be cut dramatically by using modular spindle drives in maxon motor's modular system. The GP 22 S and GP 32 S gearheads, specifically adjusted for spindles, are designed to withstand high loads, and the special spindle intake means that customer-specific spindles can be assembled easily which shortens supply times.

There are three different standard spindle types to choose from: metric spindles, trapeze spindles and spherical rotating spindles. The spindles are available as steel or ceramic variations and in any length up to 200 mm. Spindle nuts to match are supplied.

Gearheads, motors,直流无刷电机, encoders and controllers from maxon's standard program are used to drive the spindles. The individual components of the spindle drives are all compatible to help create highly effective drive solutions. For the time being, modified planetary gearheads are available in two different sizes, with diameters of 22 mm and 32 mm. Reduction ratios of 3.7:1 to 1093:1 provide maximum torques of 6 Nm and speeds of up to 1600 min-1. The additional axial bearings of these gearheads can also withstand powerful axial forces from the spindles. Planetary gearbox ONVIO




Today's servo motors have been designed to provide higher torque and greater dynamic performance to a growing number of industries and applications. Consequently, the demands on the gearbox have become equally as challenging. Dynamic performance, backlash and torsional stiffness are all crucial to the system.
Onvio?s revolutionary, modular approach to gearbox design has resulted in four unique families of products that offer the right performance and value for any application. The modular concept allows Onvio to provide a wide range of standard products or custom OEM solutions quickly and cost effectively.
Let Onvio?s team of engineers work for you. Planetary gearbox TANDLER



ServoFoxx Gearboxes

By combining planetary and Spiral Bevel Gearboxes the ServoFoxx range provides a flexible system offering any combination of ratio, input and output options you require. Not only coaxial or right angle but with hollow shafts, one or more auxilliary shafts,小功率无刷电机, switching or reversing gearboxes or even with a third shaft for speed modulation.

Thanks to the incorporation of interchangeable flange plates and a two part coupling, the gearbox will fit all motors.

Series PL2 FS ServoFoxx planetary gearbox in up to three stages
Series PSK2 ServoFoxx planetary spiral bevel gearbox
Series SKP2 ServoFoxx spiral bevel planetary gearbox
Series FS2 ServoFoxx spiral bevel gearbox with servo flange Planetary servo-gearbox REDEX ANDANTEX
SRP Series





SRP : an integrated concept

SRP is not one more simple planetary gearbox but a true integrated concept, including several functions combined together to offer a complete sub-assembly to the most demanding machines.

Featuring

- A high-tech output oversized tapered bearings assembly
- A high-tech planetary gear train, based on well know REDEX?s differential know-how
- A ready-to-use universal range of motor interface (flange and shaft adapter
- A high quality bevel gear box (option)

SRP Customized Pinion Drive

According to its Servo-gearbox true versatile design, SRP can be easily used as a Tailor-made Racks & Pinions Drive.

Natural features from this product range offer as a standard the ever useful Rack versus Pinion arrangement:
- Large pinions allow high linear speed when requested by very high dynamic applications (such as laser cutting machines, pick & place robots, etc.)
- Smaller pinion offer a higher compound stiffness when the drive system gets heavier mass to move (machine-tools)

SRP Preloaded Split Pinion

High-tech servo-reducer combined with a preloaded split pinion output (PDP) PDP is the first range of ?Preloaded Double Pinion? for high-precision rack and pinions applications.

PDP is made of 2 ground WMH pinions connected through a patented preload system to reduce dramatically rack and pinion mesh backlash. This innovative concept allows high positioning accuracy and repeatability with a very competitive budget. Planetary servo-gearbox ONVIO




Today's servo motors have been designed to provide higher
torque and greater dynamic performance to a growing number
of industries and applications. Consequently, the demands on
the gearbox have become equally as challenging. Dynamic
performance, backlash and torsional stiffness are all crucial to
the system.
Onvio?s revolutionary, modular approach to gearbox design has
resulted in three unique families of products that offer the right
performance and value for any application. The modular concept
allows Onvio to provide complete OEM solutions quickly and
economically. Whether your application requires a custom housing,
special finish,SGM12F, integrated servo motor or a completely custom
gearbox, let Onvio?s team of engineers work for you. Planetary winch gearbox DINAMIC OIL





Rotating case gearboxes, complete with static negative disc brakes, offer the best of both our planetary gearboxes and hydraulic lifting winches. Nominal output torque values range from 4.000 Nm to 50.000 Nm. Compact low backlash planetary gearbox WITTENSTEIN AG





TP+ / TP -High Torque

The top performer among compact
planetary gearheads with drive flange

In-line planetary gearheads with output flange.
Optimal for highly precise and highly dynamic production
cycles. High torsional rigidity.

- Max. acceleration torques: 15 - 10,000 Nm
- Max. input speeds: 2,200 - 6,000 rpm
- Max. torsional backlash: <= 3 arcmin
- Ratios: 4/5/7/10/16/20/21/25/28/
31/35/40/50/61/70/91/100
- All mounting positions Compact planetary gearbox Transtecno
3 - 300 Nm, i= 3.7:1 - 2 076:1 | P series





Planetary gear units P

P planetary gearboxes main features:

- Coaxial arrangement of the input and output
- Compact design
- Advantageous torque with minimum space requirements
- Low moments of inertia
- Suitable for continuous, reversing and intermittent operations
- Can be installed in any mounting positions Flange mounted planetary gearbox BERNIO ELETTROMECCANICA
63 B 14



Epicicloidal reduction gearbox with a galvanized steel frame and delrin, brass and hardned steel gear; outlet shaft
supported by two ball bearings max speed at the reduction gear 4000 R.P.M. advised speed 3000 R.P.M.
Permanent greasing.
Right to be connected with 63 B 14 output motors.
Max forces which may act on the outlet shaft:
Axial 50 kg Radial 60 kg on the extremity of outlet shaft.
High torque planetary gearbox AHP HYDRAULIKA
60.000 - 82.000 Nm



Gear Boxes series PM advantages:

High torque: from 60.000 to 82.000 Nm for any drum driving application. Floating female spline Sun Gear for radial load absorption improvements.

In Castings & Forgings specifications as per DIN high standards best materials to assure aptimum quality and performance workmanship. Compact Design. Making the series PM ONE of the lightest Gear-Boxes in the industry to comply with weight limitation laws special design of planet carriers (triangular).


Simple Assembling & Disassembly procedure large F.A.G. easy maintenance OUT/PUT bearing for high torque performance and durability. Main housing, OUT/PUT flange,GMP36-555, crown Gear & Planetary interchangeability carriers are common in all models reducing the need of service parts stock.

Flange and mounting holes are the same than all others main brands.
PM 80 Gear Box, which is indicated for mixer drums from 11 up to 15 m mixer trucks. PM 80 is the largest available gear box in the ready mix industry. Low backlash planetary gearbox BERNIO ELETTROMECCANICA



Normaly the gearboxes are shiped in the
standard dimenson like the drow.
Is possible to have different meccanical
dimension accordin with the up description.
Motor shaft max 8x18 mm.
Conecting diameter 42 mm.
Different ratio till to 614,25 on request. 16000 Nm"> Low backlash planetary gearbox SUMER
-> 16000 Nm



SUMER provides a full range of planetary gearbox:
-NR range
NUMBER OF START UPS ALLOWED FOR 15 000H : 3 600 start per hour (for a quicker rate, contact us).
* EXCEPTIONAL OUTPUT TORQUE 3 times the nominal torque
* REDUCTION RATIOS 55 ratios of 3 to 1000 with 3 reductions. 129 stages of 3 to 1000 in 4 stages.
For other ratios, contact us. The input and output shafts turn in the same direction.
* PLAY ON THE EXIT SHAFT this backlash is measured on the output shaft and subjected to a torque of 1 % of the nominal torque,dcmotor, the input shaft being locked.
Levels of preciseness :
classe 12 : backlash<= 12 min
classe 5 : backlash<= 5 min
classe 3 : backlash<= 3 min
classe 1 : backlash<= 1 min
classe 0 : on request

* TEMPERATURE - Authorized temperature at maximum speed : 150°
- Engine oil temperature reckoned while in operation under normal conditions for calculations : 90 °C
* LUBRIFICATION For normal use,GM20, our gearboxes are delivered with a synthetic oil of viscosity 150 (recommended oil : Kluber GH6150 or Fuchs Renoline PG150).


-SR range
NUMBER OF START UPS ALLOWED FOR 15 000H : 1 0 00 start per hour (for a quicker rate, contact us).
* EXCEPTIONAL OUTPUT TORQUE 2 times the nominal torque
* REDUCTION RATIOS Based ratio : 4 in one stage and all the multiples with ratio 3,GM16, 4, 5, 7 and 10.


-PR range
NUMBER OF START UPS ALLOWED FOR 15 000H : 1 000 start per hour (for a quicker rate, contact us).
* EXCEPTIONAL OUTPUT TORQUE 2 times the nominal torque
* REDUCTION RATIOS Based ratio : 3 in one stage and all the multiples with ratio 3, 4, 5, 7 and 10.


Low backlash planetary gearbox WITTENSTEIN AG





alpheno?

Your individual solution among planetary gearheads

Are you looking for an answer that is tailored your
requirements? Your demands are our challenges. More
performance with less space!
alpheno? - the sure way to success. Low backlash planetary gearbox for continuous operation WITTENSTEIN AG





SP+

The classic all-rounder among planetary gearheads

In-line planetary gearheads with output shaft.
SP High Speed optimal for high speed and continuous duty.

- Max. acceleration torques: 30 - 3,600 Nm
- Max. input speeds: 2,200 - 6,000 rpm
- Max. torsional backlash: <= 4 arcmin
- Ratios: 3/4/5/7/10/16/20/25/
28/35/40/50/70/100
- All mounting positions Planetary gearbox BERNIO ELETTROMECCANICA
NEMA 17, NEMA 23,GMP16-050SH, NEMA 34



Epicicloidal reduction gearbox with a sterized steel frame and delrin, and sterizzed steel gear; outlet shaft
supported by two ball bearings max speed at the reduction gear 4000 R.P.M. advised speed 3000 R.P.M.
Permanent greasing.
Right to be connected with Nema 23 motor.
Shaft diameter 6 and 6,35 x 21 for nema 23
Max forces which may act on the outlet shaft:
Axial 40 kg Radial 50 kg on the extremity of outlet shaft.

Planetary gearbox Bonfiglioli
max. 450 kW, 1000 - 1 100 000 Nm | 300 Series



The 300 series are compact,电子锁电机, and yet extremely powerful. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loads and impacts are more the rule than the exception. The product configuration is highly versatile, due to several options as far as the mounting, the gear layout, the output shaft and the motor interface. All the features are available for each of the 18 finely spaced frame sizes, spanning over the 1.000-1.100.000 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish,PGM-14F, it is something users can safely rely on - always.

Torque Range
1000 ... 1.100.000 Nm

Transmissible Mechanical Power
up to 450 kW

Gear Ratios
i=3,4 ... 5.000

Gear Unit Versions
In line
Right angle (with a spiral bevel gear set)

Output Configuration
Foot and flange mounted
Output shaft: solid with key,塑胶行星齿轮减速箱, splined, splined hollow,
hollow with shrink disc

Input Configurations
Flanged axial piston hydraulic motors
Hydraulic orbit motors
IEC and Nema motor adaptors
Solid input shaft

Hydraulic Brake
Hydraulically released parking brake on request

Electric Brake
DC and AC type Planetary gearbox Eurodrive PT



PG planetary gear units are divided into 21 basic groups depending on the different torques that are to be transmitted to the output shaft,TGP02D-A130, which can vary from 0.05 to 65 kNm.

In fact, the product modular construction permits the coupling of bevel gears, worm gears, hydraulic brakes and a variety of input shafts to the planetary units, as well as providing for a wide choise of coupling flanges for hydraulic or electric motors. Planetary gearbox Macron Dynamics





Macron Dynamics MPG inline planetary gear boxes are designed to eliminate the need for motor mounts used in a typical linear actuator drive system setup. These gear boxes are a direct bolt-on installation for any Macron linear actuator. The gear boxes design eliminates the need for couplings and large mounting brackets, essentially making the actuator and drive assembly a seamless integral unit.

The MPG gear box incorporates fixed input with radial clamping ring, making for quick and easy mounting to both metric or English motors. In addition, the unit's high precision gears and low backlash operation are achieved through the use of high quality components all in one lightweight package. The MPG gearboxes have gears designed for infinite life when operated at the rated torque,20BY, while the bearings and lubricant are selected to achieve maintenance-free operation for long operating periods. Planetary gearbox Mecatix
? 8 mm, 0.02 Nm



Planetary gearbox 1108 / ?8 mm - 0.02Nm

Technical data:
Output shaft material: Stainless steel
Cover material: Plastic
Axial play: 0.1 max
Max. radial force at 5mm from bearing: 5N
Max. axial force: 5N Planetary gearbox Mecatix
? 40 mm, 5 - 15 Nm



Planetary gearbox 1040 / ?40mm - 5...15 Nm

Technical data:
Output shaft material - Stainless steel
Cover material - Steel
Radial play at 5mm from bearing - 0.03mm
Axial play - ~0 (no-load)
Average backlash at no-load - 0.5°
Max. radial force at 5mm from bearing - 500N
Max. axial force - 300N Planetary gearbox Mecatix
? 55 mm, 10 - 35 Nm



Planetary gearbox 1055 / ?55mm - 10?35 Nm

Technical data:
Output shaft material - Stainless steel
Cover material - Steel
Radial play at 5mm from bearing - 30μm
Axial play - ~0 (no-load)
Average backlash at no-load - 0.5°
Max. radial force at 5mm from bearing - 560N
Max. axial force - 490N Planetary gearbox Mecatix
? 57 mm, 10 - 35 Nm



Planetary gearbox 1057 / ?57mm - 10?35 Nm

Technical data:
Output shaft material - Stainless steel
Cover material - Steel
Radial play at 5mm from bearing - 30μm
Axial play - ~0 (no-load)
Average backlash at no-load - 0.5°
Max. radial force at 5mm from bearing - 560N
Max. axial force - 490N Planetary gearbox Mecatix
? 86 mm, 30 - 90 Nm



Planetary gearbox 1086 / ?86mm - 30?90 Nm

Technical data:
Output shaft material - Stainless steel
Cover material - Steel
Radial play at 5mm from bearing - 30μm
Axial play - ~0 (no-load)
Average backlash at no-load - 0.5°
Max. radial force at 19mm from bearing - 650N
Max. axial force - 600N Planetary gearbox Mecatix
? 43 mm, 5 - 15 Nm



Planetary gearbox 1043 / ?43mm - 5?15 Nm

Technical data:
Output shaft material - Stainless steel
Cover material - Steel
Radial play at 5mm from bearing - 30μm
Axial play - ~0 (no-load)
Average backlash at no-load - 0.5°
Max. radial force at 5mm from bearing - 500N
Max. axial force - 300N Planetary gearbox Quality Transmission Components



Planetary Gearheads - Size 52
MATERIAL:
Housing ? Aluminum
Gears ? 4135 Alloy Steel - HRC 50...52
Output Shaft ? 4135 Alloy Steel - HRC 30...32
SPECIFICATIONS:
Max. Input Speed: 6000 rpm
Efficiency:
Single Stage: 95%
Double Stage: 92%
Backlash: 15 arc min., 10 arc min., or 3 arc min.
Torsional Stiffness: 0.8 Nm/arc min. (7 lb. in./arc min.)
Weight:
Single Stage: 0.55 kg (1.2 lb.)
Double Stage: 0.72 kg (1.6 lb.)

Planetary Gearheads - Size 78
MATERIAL:
Housing ? Aluminum
Gears ? 4135 Alloy Steel - HRC 50...52
Output Shaft ? 4135 Alloy Steel - HRC 30...32
SPECIFICATIONS:
Max. Input Speed: 6000 rpm
Efficiency:
Single Stage: 95%
Double Stage: 92%
Backlash: 15 arc min., 5 arc min., or 3 arc min.
Torsional Stiffness: 3 Nm/arc min. (27 in. lb. /arc min.)
Weight:
Single Stage: 1.7 kg (3.7 lb.)
Double Stage: 2.1 kg (4.6 lb.)

Planetary Gearheads - Size 98
MATERIAL:
Housing ? Aluminum
Gears ? 4135 Alloy Steel - HRC 50...52
Output Shaft ? 4135 Alloy Steel - HRC 30...32
SPECIFICATIONS:
Max. Input Speed: 5100 rpm
Efficiency:
Single Stage: 95%
Double Stage: 92%
Backlash: 15 arc min., 5 arc min., or 3 arc min.
Torsional Stiffness: 6 Nm/arc min. (53 in. lb. /arc min.)
Weight:
Single Stage: 3.2 kg (7.0 lb.)
Double Stage: 3.9 kg (8.6 lb.) ... see all the products in the category    Planetary gearboxes   see the results for the following category : Right angle gearboxes
  | All the industrial Manufacturers | Supplier, Dealer and Distributor listing | Quotes, price list | Comparative test
| Technical characteristics and specifications | Documentation and PDF catalogue | New and used sales directory |
Copyright ? DirectIndustry /* AppliqueLogRefLuLp */ fullUrl = document.location.href; posDiez = fullUrl.indexOf("#reflu="); ref="lu"; if(posDiez0 ) { memoPart = fullUrl.substr(posDiez+7,fullUrl.length-1); urlOrig = fullUrl.substr( 0 , posDiez ); if(memoPart.length>0) { xmlhttp_ref = xmlhttp_gen(); urlAjax = "/scripts/traitement_global/historeflulp.ajax.php?inBaseIDV="+IDV+"&reflulp="+memoPart+"&ref="+ref+"&urlOrig="+urlCle; xmlhttp_ref.open("GET",urlAjax); xmlhttp_ref.send(null); } } /* AppliqueLogPayantJs */ fullUrl = document.location.href; posDiez = fullUrl.indexOf("#refp-"); posDiez2=fullUrl.indexOf("#ml1"); schEngine = fullUrl.indexOf("#se"); IDV = "0"; urlCle = "/industrial-manufacturer/planetary-gearbox-68955.html"; if( posDiez >0 ) { memoPart = fullUrl.substr(posDiez+6,GM14-032,fullUrl.length-1); urlOrig = fullUrl.substr( 0 , posDiez ); if(memoPart.length>0) { xmlhttp_ref = xmlhttp_gen(); urlAjax = "/scripts/traitement_global/histo.ajax.php?inBaseIDV="+IDV+"&refPayant="+memoPart+"&urlOrig="+urlCle; //alert(urlAjax); xmlhttp_ref.open("GET",PGM-40F,urlAjax); xmlhttp_ref.send(null); } } if( posDiez2 >0 ) { urlOrig = fullUrl.substr( 0 , posDiez2 ); xmlhttp_ref = xmlhttp_gen(); urlAjax = "/scripts/traitement_global/histo.ml.php?inBaseIDV="+IDV+"&urlOrig="+urlCle; xmlhttp_ref.open("GET",urlAjax); xmlhttp_ref.send(null); } if( schEngine > 0){ urlOrig = fullUrl.substr( 0 , schEngine ); sch = fullUrl.substr(schEngine+3); xmlhttp_ref = xmlhttp_gen(); urlAjax = "/scripts/traitement_global/histo.se.php?inBaseIDV="+IDV+"&urlOrig="+urlCle+"&search="+sch; xmlhttp_ref.open("GET",urlAjax); xmlhttp_ref.send(null); } /* hide wait js */ hide_waitsearch(); /* focusSearchBox */ if (document.getElementById("text_kw") != null){document.Recherche.text_kw.focus();} /* showhide_full_subcat_tr */ document.getElementById('pagination_bas').innerHTML = document.getElementById('pagination_haut').innerHTML; function showhide_full_subcat_tr(show){ e = document.getElementById('misc_tr_moins').innerHTML; f = document.getElementById('misc_tr_plus').innerHTML; document.getElementById('misc_tr_plus').innerHTML=e; document.getElementById('misc_tr_moins').innerHTML=f; } /* redirect_mapage */ function redirect_mapage(lien){ url = lien; date = new Date(); if(url.indexOf('?') recherche-kwref www di En 2010-06-24-19 相关的主题文章:

文章为作者独立观点,不代表阿里巴巴以商会友立场。转载此文章须经作者同意,并附上出处及文章链接。
0 20