JIS 日本国家标准(5)

王新伟 | 创建时间:2011年08月04日 10:47 | 浏览: 313 | 评论: 0

JIS C5101-13-1-2009 电子设备用固定电容器.第13-1部分:空白详细规范.聚丙烯膜介质金属膜直流固定电容器.评定等级E和EZ Fixed capacitors for use in electronic equipment -- Part 13-1: Blank detail specification -- Fixed polypropylene film dielectric metal foil d.c. capacitors -- Assessment levels E and EZ
JIS C5101-13-2009 电子设备用固定电容器.第13部分:分规范:金属箔式聚苯乙烯膜介质直流固定电容器 Fixed capacitors for use in electronic equipment -- Part 13: Sectional specification -- Fixed polypropylene film dielectric metal foil d.c. capacitors
JIS G3214 AMD 1-2009 压力容器用不锈钢锻件(修改件1) Stainless steel forgings for pressure vessels (Amendment 1)
JIS C9745-1-2009 手持式电动工具.安全性.第1部分:一般要求 Hand-held motor-operated electric tools -- Safety -- Part 1: General requirements
JIS S4051-2009 成人手套用定定型装置和象形图 Sizing systems and pictogram for adult gloves
JIS Z3313-2009 低碳钢、高强度钢和低温工作钢的气体保护和自保护金属电弧焊用药芯焊丝 Flux cored wires for gas shielded and self-shielded metal arc welding of mild steel, high strength steel and low temperature service steel
JIS C5101-2-1-2009 电子设备用固定电容器.第2-1部分:空白详细规范:金属化聚乙烯对苯二甲酸酯薄膜介质直流固定电容器.评定等级E和EZ Fixed capacitors for use in electronic equipment -- Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors -- Assessment levels E and EZ
JIS C5101-16-2009 电子设备用固定电容器.第16部分:分规范:金属化聚丙烯膜介质直流固定电容器 Fixed capacitors for use in electronic equipment -- Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
JIS C5101-14-3-2009 电子设备用固定电容器.第14-3部分:空白详细规范:电磁干扰抑制和供电干线连接用固定电容器.评定等级DZ Fixed capacitors for use in electronic equipment -- Part 14-3: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains -- Assessment level DZ
JIS C5101-14-2-2009 电子设备用固定电容器.第14-2部分:空白详细规范:电磁干扰抑制和供电干线连接用固定电容器.仅安全试验 Fixed capacitors for use in electronic equipment -- Part 14-2: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains -- Safety tests only
JIS C5101-14-2009 电子设备用固定电容器.第14部分:分规范:电磁干扰抑制和供电干线连接用固定电容器 Fixed capacitors for use in electronic equipment -- Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
JIS C5101-14-1-2009 电子设备用固定电容器.第14-1部分:空白详细规范:电磁干扰抑制和供电干线连接用固定电容器.评定等级D Fixed capacitors for use in electronic equipment -- Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains -- Assessment level D
JIS B2313-2009 钢板制对焊管配件 Steel plate butt-welding pipe fittings
JIS B2312-2009 钢制对焊管配件 Steel butt-welding pipe fittings
JIS K8001-2009 试剂试验方法用通用规则 General rule for test methods of reagents
JIS K0126-2009 流动分析用通用规则 General rules for flow analysis
JIS K0150-2009 表面化学分析.用辉光放电光发射光谱测定法分析锌和/或铝基金属涂层 Surface chemical analysis -- Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry
JIS B2403-2009 V型密封件 V packings
JIS C60068-2-80-2009 环境试验.第2-80部分:试验.试验Fi:振动.混合模式 Environmental testing -- Part 2-80: Tests -- Test Fi: Vibration -- Mixed mode
JIS Z3331 AMD 1-2009 钛及钛合金弧焊条及实心焊丝(修改件1) Titanium and titanium alloy welding rods and solid wires (Amendment 1)
JIS K6869-2009 塑料.用气相色谱法测定聚苯乙烯(PS)中残余的苯乙烯单体和耐冲击聚苯乙烯(PS-I) Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS C9745-2-6-2009 手持式电动工具.安全性.第2-6部分:电锤的特殊要求 Hand-held motor-operated electric tools -- Safety -- Part 2-6: Particular requirements for hammers
JIS C9745-2-14-2009 手持式电动工具.安全性.第2-14部分:刨刀的特殊要求 Hand-held motor-operated electric tools -- Safety -- Part 2-14: Particular requirements for planers
JIS C9745-2-5-2009 手持式电动工具.安全性.第2-5部分:圆盘锯的特殊要求 Hand-held motor-operated electric tools -- Safety -- Part 2-5: Particular requirements for circular saws
JIS C9745-2-3-2009 手持式电动工具.安全性.第2-3部分:磨床、抛光机和砂轮磨光机的特殊要求 Hand-held motor-operated electric tools -- Safety -- Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
JIS M8713-2009 铁矿石.用还原指数的最终值测定还原性 Iron ores -- Determination of reducibility by the final degree of reduction index
JIS C60721-1-2009 环境条件分类.第1部分:环境参数及其严酷程度 Classification of environmental conditions -- Part 1: Environmental parameters and their severities
JIS C60721-3-1-2009 环境条件分类.第3部分:环境参数组及其严酷程度的分类.第1节:储存 Classification of environmental conditions -- Part 3: Classification of groups of environmental parameters and their severities -- Section 1: Storage
JIS L1084-2009 植绒织物的试验方法 Testing methods for flocked fabrics
JIS L1055-2009 窗帘材料遮光效果的试验方法 Testing methods for light blocking effect of curtain materials
JIS C9745-2-19-2009 手持式电动工具.安全性.第2-19部分:连接器的特殊要求 Hand-held motor-operated electric tools -- Safety -- Part 2-19: Particular requirements for jointers
JIS L1901-2009 机织品和针织品纱线因反转起毛面的试验方法 Testing methods for frosting due to yarn reversing of woven and knitted fabrics
JIS Z3262 ERRATUM 1-2008 勘误表 ERRATUM
JIS T3239 ERRATUM 1-2008 勘误表 ERRATUM
JIS C9335-2-75 ERRATUM 1-2008 家用及类似用途电器.安全性.第2-75部分:商用配药器和自动售货机详细要求.勘误表 Household and similar electrical appliances -- Safety -- Part 2-75: Particular requirements for commercial dispensing appliances and vending machines -- ERRATUM
JIS C9335-2-56 ERRATUM 1-2008 家用及类似用途电器.安全性.第2-56部分:放映机和类似用途电器详细要求.勘误表 Household and similar electrical appliances -- Safety -- Part 2-56: Particular requirements for projectors and similar appliances --ERRATUM
JIS C9335-2-54 ERRATUM 1-2008 家用及类似用途电器.安全性.第2-54部分:利用液体的家用表面清洁电器详细要求.勘误表 Household and similar electrical appliances -- Safety -- Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam --ERRATUM
JIS C9335-2-45 ERRATUM 1-2008 家用及类似用途电器.安全性.第2-45部分:便携式加热工具及类似用途电器详细要求.勘误表 Household and similar electrical appliances -- Safety -- Part 2-45: Particular requirements for portable heating tools and similar appliances -- ERRATUM
JIS C9335-2-35 ERRATUM 1-2008 家用及类似用途电器.安全性.第2-35部分:即时热水器详细要求.勘误表 Household and similar electrical appliances -- Safety -- Part 2-35: Particular requirements for instantaneous water heaters -- ERRATUM
JIS C9335-2-12 ERRATUM 1-2008 家用及类似用途电器.安全性.第2-12部分:保温板及类似用途电器详细要求.勘误表 Household and similar electrical appliances -- Safety -- Part 2-12: Particular requirements for warming plates and similar appliances --ERRATUM
JIS C9335-1 ERRATUM 1-2008 家用及类似用途电器.安全性.第1部分:一般要求.勘误表 Household and similar electrical appliances -- Safety -- Part 1: General requirements --ERRATUM
JIS B1352 ERRATUM 1-2008 圆锥销.勘误表 Taper pins - ERRATUM
JIS K2251 ERRATUM 1-2009 原油和石油产品.取样.勘误表 Crude petroleum and petroleum products -- Sampling -- ERRATUM
JIS Z8141 ERRATUM 1-2008 生产管理中应用的术语表.勘误表 Glossary of terms used in production management -- ERRATUM
JIS B8265 AMD 2-2008 压力容器的构造.一般原理(修改件2) Construction of pressure vessel -- General principles (Amendment 2)
JIS Z8703 ERRATUM 1-2008 勘误表 ERRATUM
JIS L1902 ERRATUM 1-2008 勘误表 ERRATUM
JIS C9730-2-8 ERRATUM 2-2008 勘误表 ERRATUM
JIS C9300-7 ERRATUM 1-2008 勘误表 ERRATUM
JIS B4636-1 ERRATUM 1-2008 勘误表 ERRATUM
JIS C5101-8-1-2008 电子设备用固定电容器.第8-1部分:空白详细规范:1级陶瓷介质固定电容器.评定等级EZ Fixed capacitors for use in electronic equipment -- Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 Assessment level EZ
JIS Z4751-2-7-2008 医用电气设备.第2-7部分:诊断X射线发生器中高压发生器安全性的特殊要求 Medical electrical equipment -- Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
JIS Z4120-2008 医疗电气设备.医疗诊断用X射线管组件.焦点的特性 Medical electrical equipment -- X-ray tube assemblies for medical diagnosis -- Characteristics of focal spots
JIS T3323-2008 压力传感器 Pressure transducers
JIS T0601-2-16-2008 医用电气设备.第2-16部分:血液透析设备、血液全过滤设备和血液过滤设备安全性的特殊要求 Medical electrical equipment -- Part 2-16: Particular requirements for the safety of haemodialysis, haemodiafiltration and haemodiafiltration equipment
JIS T6127-2008 牙科汞齐用牙科汞及合金 Dental mercury and alloys for dental amalgam
JIS C5101-9-2008 电子设备用固定电容器.第9部分:分规范:2级陶瓷介质固定电容器 Fixed capacitors for use in electronic equipment -- Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
JIS C5101-8-2008 电子设备用固定电容器.第8部分:分规范:1级陶瓷介质固定电容器 Fixed capacitors for use in electronic equipment -- Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
JIS Z3211-2008 低碳钢、高拉伸强度钢和低温工作钢用涂剂焊条 Covered electrodes for mild steel, high tensile strength steel and low temperature service steel
JIS S2103 AMD 1-2008 家用燃气烹调器具(修改件1) Gas burning cooking appliances for domestic use (Amendment 1)
JIS C3316 AMD 1-2008 电气装置用聚氯乙烯绝缘线(修改件1) Polyvinyl chloride insulated wires for electrical apparatus (Amendment 1)
JIS C9300-1 AMD 1-2008 弧焊设备.第1部分:弧焊电源(修改件1) Arc welding equipment -- Part 1: Arc welding power sources(Amendment 1)
JIS K6814-2008 热塑性塑料管.热可逆试验方法 Thermoplastics pipes -- Thermal reversion test method
JIS K6816-2008 热塑性塑料管和配件.维卡软化温度用试验方法 Thermoplastics pipes and fittings -- Test method for Vicat softening temperature
JIS K7153-2008 塑料.试验样品线性尺寸的测定 Plastics -- Determination of linear dimensions of test specimens
JIS C0511-3-2008 功能安全.加工工业部门的安全仪表化系统.第3部分:要求的安全完整性等级的测定指南 Functional safety -- Safety instrumented systems for the process industry sector -- Part 3: Guidance for the determination of the required safety integrity levels
JIS C0511-2-2008 功能安全.加工工业部门的安全仪表化系统.第2部分:JIS C 0511-1的应用指南 Functional safety -- Safety instrumented systems for the process industry sector -- Part 2: Guidelines for the application of JIS C 0511-1
JIS C61000-4-34-2008 电磁兼容性(EMC).第4-34部分:测试和测量技术.输入电流超过每相16 A设备的电压降、短时中断及电压变化抗扰度试验 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques -- Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16A per phase
JIS B7505-3-2008 无液压力计.第3部分:交易或认证用电子测量仪表 Aneroid pressure gauges -- Part 3: Electronic measuring instruments used in transaction or certification
JIS B8277-2008 压力容器用膨胀接合 Expansion joint for pressure vessels
JIS C8110-2008 放电灯用镇流器(不包括管形荧光灯) Ballasts for discharge lamps (excluding tubular fluorescent lamps)
JIS S6035 ERRATUM 1-2009 勘误表 ERRATUM
JIS B4636-1 ERRATUM 1-2009 勘误表 ERRATUM
JIS X0221 ERRATUM 1-2009 勘误表 ERRATUM
JIS K2251 ERRATUM 2-2009 勘误表 ERRATUM
JIS G3322 ERRATUM 1-2009 勘误表 ERRATUM
JIS C8147-2-13 ERRATUM 1-2009 勘误表 ERRATUM
JIS B1554 ERRATUM 1-2009 勘误表 ERRATUM
JIS B1552 ERRATUM 1-2009 勘误表 ERRATUM
JIS K7236 AMD 1-2009 环氧树脂中环氧当量的测定(修改件1) Determination of epoxy equivalent in epoxy resins(Amendment 1)
JIS K7151 AMD 1-2009 塑料.热塑性塑料材料的压缩模塑试样(修改件1) Plastics -- Compression moulding test specimens of thermoplastic materials(Amendment 1)
JIS S4001-2009 安全火柴 Safety match
JIS P8117-2009 纸和纸板.透气度和空气阻力(中等范围)的测定.古尔勒法 Paper and board -- Determination of air permeance and air resistance(medium range) -- Gurley method
JIS Z2251-2009 努普硬度试验.试验方法 Knoop hardness test -- Test method
JIS M8715-2009 铁矿石球团.自由膨胀指数的测定 Iron ore pellets -- Determination of free-swelling index
JIS P8131-2009 纸板.破裂强度的测定 Board -- Determination of bursting strength
JIS M8712-2009 铁矿石.滚动强度的测定 Iron ores -- Determination of tumble strength
JIS Z2244-2009 维氏硬度试验.试验方法 Vickers hardness test -- Test method
JIS K6238-1-2009 生橡胶.挥发物质含量的测定.第1部分:热轧机方法和烘烤炉方法 Rubber, raw -- Determination of volatile-matter content -- Part 1: Hot mill method and oven method
JIS K6238-2-2009 生橡胶.挥发物质含量的测定.第2部分:使用带红外线干燥的自动分析仪的重量分析法 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric method using automatic analyzer with infrared drying
JIS K7016-8-2009 纤维增强塑料.实验板的制造方法.第8部分:SMC和BMC的压缩模塑 Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC
JIS K0555 AMD 1-2009 高纯度水中硅石的测定用测试方法(修改件1) Testing methods for determination of silica in highly purified water (Amendment 1)
JIS A8972-2008 护坡工程用临时设施 Temporary facilities for slope protection works
JIS L5133-1998 条筒和筒簧 Sliver cans and cans spring
JIS B4632-1998 双头梅花扳手 Offset wrenches
JIS B8002-4-1998 往复式内燃机.性能.第4部分:速度控制 Reciprocating internal combustion engines -- Performance -- Part 4: Speed governing
JIS K6234-1998 橡胶.游离硫的测定 Rubber -- Determination of free sulfur
JIS C9335-2-100 ERRATUM 1-2008 勘误表 ERRATUM
JIS C9335-2-75 ERRATUM 2-2008 勘误表 ERRATUM
JIS C9335-2-56 ERRATUM 2-2008 勘误表 ERRATUM
JIS C9335-2-54 ERRATUM 2-2008 勘误表 ERRATUM
JIS C9335-2-45 ERRATUM 2-2008 勘误表 ERRATUM
JIS C9335-2-43 ERRATUM 1-2008 勘误表 ERRATUM
JIS C9335-2-35 ERRATUM 2-2008 勘误表 ERRATUM
JIS C9335-2-29 ERRATUM 1-2008 勘误表 ERRATUM
JIS C9335-2-12 ERRATUM 2-2008 勘误表 ERRATUM
JIS C8147-1 ERRATUM 1-2008 勘误表 ERRATUM
JIS G3140-2008 桥梁用高屈服强度钢厚板材 Higher yield strength steel plates for bridges
JIS S2109-2008 家用燃气热水器 Gas burning water heaters for domestic use
JIS R1684-2008 精细陶瓷(高级陶瓷、高级工业陶瓷).使用电流中断技术的固体氧化物电化学电池用单个电池电极试验方法 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Single cell polarization test method for solid oxide electrochemical cell by current interruption technique
JIS C9502-2008 自行车用照明设备 Lighting equipment for bicycles
JIS R2115-2008 耐火制品透气率的测试方法 Testing method for permeability to gases of refractory products
JIS R2016-1-2008 耐火制品和原材料中硫的测定方法.第1部分:重量和滴定法 Methods for determination of sulfur in refractory products and raw materials -- Part 1: Gravimetric and titrimetric methods
JIS C60695-10-2-2008 火灾测试.第10-2部分:异常热度.球压试验 Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test
JIS D9431-2008 自行车.车座 Bicycles -- Saddles
JIS H4040 ERRATUM 1-2008 勘误表 ERRATUM
JIS Z8141 ERRATUM 2-2008 勘误表 ERRATUM
JIS Z3420 ERRATUM 1-2008 勘误表 ERRATUM
JIS Z3197 ERRATUM 1-2008 勘误表 ERRATUM
JIS K0102 ERRATUM 1-2008 勘误表 ERRATUM
JIS X7254-2008 OWL网络本体语言.语义学和抽象句法 OWL Web Ontology Language -- Semantics and Abstract Syntax
JIS X4157-3-2008 信息技术.主题映像.第3部分:XML句法 Information technology -- Topic Maps -- Part 3: XML syntax
JIS Z3120-2009 混凝土加固用钢筋气压焊接缝测试的方法及合格准则 Method and acceptance of criteria of test for gas pressure welded joint of steel bars for concrete reinforcement
JIS Q9000 ERRATUM 1-2009 勘误表 ERRATUM
JIS B8415-2008 工业燃烧炉用一般安全规则 General safety code for industrial combustion furnaces
JIS G1301-2008 铁合金.化学分析的通用规则 Ferroalloys -- General rules for chemical analysis
JIS X6938-2008 办公设备可消费量的测量用彩色测试页 Colour test pages for measurement of office equipment consumable yield
JIS G3114-2008 焊接结构用耐大气腐蚀热轧钢材 Hot-rolled atmospheric corrosion resisting steels for welded structure
JIS H4100 ERRATUM 1-2008 勘误表 ERRATUM
JIS G3106-2008 焊接结构用轧制钢材 Rolled steels for welded structure
JIS G0801-2008 压力容器用钢板的超声检验 Ultrasonic testing of steel plates for pressure vessels
JIS G0560-2008 钢的硫印方法 Method of sulphur print for steel
JIS B7612-2-2008 称重仪器用测压元件.第2部分:数字测压元件 Load Cells for Weighing Instruments -- Part 2: Digital Load Cells
JIS G4053-2008 机器结构用低合金钢 Low-alloyed steels for machine structural use
JIS G4052-2008 带有规定淬硬性钢带的结构用钢材 Structural steels with specified hardenability bands
JIS G0416 AMD 1-2008 钢和钢产品.机械测试用样品和试样的取样位置和制备(修改件1) Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing (Amendment 1)
JIS K5602-2008 用涂膜测定太阳辐射的反射比 Determination of reflectance of solar radiation by paint film
JIS C6804-2008 激光产品的安全性.信息传输用自由空间光学通信系统的安全性 Safety of laser products -- Safety of free space optical communication systems used for transmission of information
JIS T7101 ERRATUM 2-2008 勘误表 ERRATUM
JIS T3213 ERRATUM 1-2008 勘误表 ERRATUM
JIS K0093 ERRATUM 1-2008 勘误表 ERRATUM
JIS H4100 ERRATUM 2-2008 勘误表 ERRATUM
JIS H4080 ERRATUM 1-2008 勘误表 ERRATUM
JIS H4040 ERRATUM 2-2008 勘误表 ERRATUM
JIS C9335-2-34 ERRATUM 1-2008 勘误表 ERRATUM
JIS C9335-1 ERRATUM 2-2008 勘误表 ERRATUM
JIS C8704-1 ERRATUM 1-2008 勘误表 ERRATUM
JIS C8122 ERRATUM 1-2008 勘误表 ERRATUM
JIS C3663-2 ERRATUM 1-2008 勘误表 ERRATUM
JIS B8805 ERRATUM 1-2008 勘误表 ERRATUM
JIS T9201 ERRATUM 1-2008 勘误表 ERRATUM
JIS C8108 ERRATUM 1-2008 勘误表 ERRATUM
JIS B1352 AMD 1 ERRATUM 1-2008 勘误表 ERRATUM
JIS B1128 ERRATUM 1-2008 勘误表 ERRATUM
JIS B1107 ERRATUM 1-2008 勘误表 ERRATUM
JIS A5759 ERRATUM 1-2008 勘误表 ERRATUM
JIS A5031 ERRATUM 1-2008 勘误表 ERRATUM
JIS K6960-2008 塑料.在高固相厌氧消化条件下测定最终厌氧生物降解.释放的沼气分析法 Plastics -- Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas
JIS K7242-2-2008 塑料.烟雾的产生.第2部分:使用单室试验测定光密度 Plastic -- Smoke generation -- Part 2 : Determination of optical density by a single-chamber test
JIS A4008-2008 通风盘管装置 Fancoil units
JIS C6871-2008 持续偏振光纤的结构参数用试验方法 Test methods for structural parameters of polarization-maintaining optical fibers
JIS K6304 AMD 1-2008 自行车轮胎的内胎(修改件1) Inner tubes for bicycle tyres (Amendment 1)
JIS D9428 AMD 1-2008 自行车变速齿轮传动机构(修改件1) Derailleur for bicycles (Amendment 1)
JIS D9422 AMD 1-2008 自行车轮胎气门(修改件1) Tire valves for bicycles (Amendment 1)
JIS B7285-2008 眼镜框.要求和试验方法 Spectacle frames -- Requirements and test methods
JIS C5953-5-2008 纤维光学有源元件及器件.性能标准.第5部分:带LD驱动器和CDR ICs的ATM-PON收发器 Fiber optic active components and devices -- Performance standards -- Part 5: ATM-PON transceivers with LD driver and CDR ICs
JIS C6837-2008 全塑多模光学纤维 All plastic multimode optical fibers
JIS B7611-3-2008 非自动称重仪器.度量衡学和技术要求及试验.第3部分:交易或鉴定用重量和砝码 Nonautomatic weighing instruments -- Metrological and technical requirements and tests -- Part 3: Weights and poises used in transaction or certification
JIS L0860-2008 耐干洗色牢度的试验方法 Test methods for colour fastness to dry cleaning
JIS S2122-2008 家用燃气空间加热器 Gas burning space heaters for domestic use
JIS G3548 AMD 1-2008 镀锌钢丝(修改件1) Zinc-coated steel wires(Amendment 1)
JIS G3547 AMD 1-2008 镀锌低碳钢丝(修改件1) Zinc-coated low carbon steel wires(Amendment 1)
JIS G3543 AMD 1-2008 有色塑料包覆钢丝(修改件1) Steel wire coated with colored plastics(Amendment 1)
JIS G3542 AMD 1-2008 预镀着色镀锌钢丝(修改件1) Precoated color zinc-coated steel wires(Amendment 1)
JIS G3537 AMD 1-2008 镀锌钢绞线(修改件1) Zinc-coated steel wire strands(Amendment 1)
JIS G3533 AMD 1-2008 刺钢丝(修改件1) Barbed wires(Amendment 1)
JIS X6913-2008 数字复印机及其相关的试验程序标准规范表 Standard specification form for digital duplicator and related testing procedure
JIS L4406 AMD 1-2008 瓷砖铺面(修改件1) Tile carpet(Amendment 1)
JIS L4405 AMD 1-2008 簇绒地毯(修改件1) Tufted pile carpet(Amendment 1)
JIS L4404 AMD 1-2008 机织地毯(修改件1) Woven carpet(Amendment 1)
JIS D2602-2008 内燃机冷却系统用橡胶软管和管件.规范 Rubber hoses and tubing for cooling systems for internal-combustion engines -- Specification
JIS C9913-2008 电子设备挥发性有机化合物和羰基化合物排放量的测量方法 Measuring method of volatile organic compounds and carbonyl compounds emissions for electronic equipment -- Chamber method
JIS C5954-2-2008 纤维光学有源元件及器件.试验和测量程序.第2部分:ATM-PON收发器 Fiber optic active components and devices -- Test and measurement procedures -- Part 2: ATM-PON transceivers
JIS R1701-5-2008 精细陶瓷(高级陶瓷、高级工业陶瓷).光催化材料的空气净化性能的试验方法.第5部分:甲苯的清除 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials -- Part 5: Removal of methylmercaptan
JIS R1701-4-2008 精细陶瓷(高级陶瓷、高级工业陶瓷).光催化材料的空气净化性能试验方法.第4部分:甲苯的清除 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials -- Part 4: Removal of formaldehyde
JIS X3015-2008 信息技术.程序设计语言.C Sharp语言 Information technology -- Programming languages -- C Sharp
JIS G3536-2008 预应力混凝土用钢丝和绞线 Steel wires and strands for prestressed concrete
JIS G3137-2008 预应力混凝土用小直径钢筋 Small diameter steel bars for prestressed concrete
JIS G3109-2008 预应力混凝土用钢筋 Steel bars for prestressed concrete
JIS Q27006-2008 信息技术.安全技术.信息安全管理系统审核和认证的机构要求 Information technology -- Security techniques -- Requirements for bodies providing audit and certification of information security management systems
JIS C9300-12-2008 电弧焊接设备.第12部分:电缆焊接用连接装置 Arc welding equipment -- Part 12: Coupling devices for welding cables
JIS M8108-2008 铬矿石、锰矿石和铁锰矿石.取样、样品制备和含水量及粒度分布的测定 Chromium, manganese and ferruginous manganese ores -- Sampling, sample preparation and determination of moisture content and size distribution
JIS K6745-2008 塑料.未增塑聚氯乙烯薄板材 Plastics -- Unplasticized poly (vinyl chloride) sheets
JIS C8147-2-13-2008 灯控设备.第2-13部分:LED模块用直流或交流供电控制设备的特殊要求 Lamp controlgear -- Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
JIS C8147-2-12-2008 灯控设备.第2-12部分:放电灯用直流或交流供电镇流器的特殊要求(不包括荧光灯) Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
JIS C8117-2008 荧光灯用交流(AC)电子镇流器 AC supplied electronic ballasts for fluorescent lamps
JIS C8120-2008 荧光灯用交流供电电子镇流器.性能要求 A.C.-supplied electronic ballasts for fluorescent lamps -- Performance requirements
JIS R7202-2008 圆柱形机加工石墨电极的锥形螺纹断面角和中径的测试方法 Testing methods for taper screw thread angle and pitch diameter of cylindrical machined graphite electrodes
JIS H7903-2008 多孔金属的导热性试验用方法 Method for thermal conductivity test of porous metals
JIS H7902-2008 多孔金属的压缩试验用方法 Method for compressive test of porous metals
JIS H7009-2008 多孔金属用术语的术语表 Glossary of terms used in porous metals
JIS Z1701-2008 橡胶带 Rubber band
JIS C8364-2008 配线通道 Busways
JIS X6937-2008 含有打印机部件的彩色喷墨打印机和多功能设备用墨盒产量的测定方法 Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
JIS X6932-2008 含有打印机部件的彩色打印机和多功能设备用硒鼓产量的测定方法 Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
JIS B7547-2008 数字压力计的表征和校准程序 Procedures of characterization and calibration for digital pressure gauges
JIS Z6014-2008 数字化图像的测试图.电子成像的说明和使用 Test chart for digitizing image -- Description and use in electronic imagery
JIS C5954-1-2008 纤维光学有源元件及器件.试验和测量程序.第1部分:总则和指南 Fiber optic active components and devices -- Test and measurement procedures -- Part 1: General and guidance
JIS A5541-2008 建筑用套筒螺母套 Body of turnbuckle for building
JIS A5540-2008 建筑用紧线器 Turnbuckle for building
JIS L1902-2008 纺织品抗菌活性和功效的测试 Testing for antibacterial activity and efficacy on textile products
JIS C5952-12-2008 纤维光学有源元件及器件.包装和接口标准.第12部分:带同轴RF连接器的激光发射机 Fibre optic active components and devices -- Package interface standards --Part 12: Laser transmitters with a coaxial RF connector
JIS C6872-2008 持续偏振光纤的振动长度测量 Beat length measurement of polarization-maintaining optical fibers
JIS C5952-9-2008 纤维光学有源元件及器件.包装和接口标准.第9部分:SFF MU双重10-pin收发器 Fibre optic active components and devices -- Package and interface standards -- Part 9: SFF MU duplex 10-pin transceivers
JIS C5952-8-2008 纤维光学有源元件及器件.包装和接口标准.第8部分:SFF LC 20-pin收发器 Fibre optic active components and devices -- Package and interface standards -- Part 8: SFF LC 20-pin transceivers
JIS C5952-7-2008 纤维光学有源元件及器件.包装和接口标准.第7部分:SFF LC 10-pin收发器 Fibre optic active components and devices -- Package and interface standards -- Part 7: SFF LC 10-pin transceivers
JIS C5952-6-2008 纤维光学有源元件及器件.包装和接口标准.第6部分:ATM-PON收发器 Fibre optic active components and devices -- Package and interface standards -- Part 6: ATM-PON transceivers
JIS C5952-5-2008 纤维光学有源元件及器件.包装和接口标准.第5部分:SC 1x9光学纤维模块 Fibre optic active components and devices -- Package and interface standards -- Part 5: SC 1x9 fibre optic modules
JIS C5952-4-2008 纤维光学有源元件及器件.包装和接口标准.第4部分:PN 1x9塑料光学纤维收发器 Fibre optic active components and devices -- Package and interface standards -- Part 4: PN 1x9 plastic optical fibre transceivers
JIS C5952-3-2008 纤维光学有源元件及器件.包装和接口标准.第3部分:SFF MT-RJ 20-pin收发器 Fibre optic active components and devices -- Package and interface standards -- Part 3: SFF MT-RJ 20-pin transceivers
JIS C5952-2-2008 纤维光学有源元件及器件.包装和接口标准.第2部分:SFF MT-RJ 10-pin收发器 Fibre optic active components and devices -- Package and interface standards -- Part 2: SFF MT-RJ 10-pin transceivers
JIS C5952-11-2008 纤维光学有源元件及器件.包装和接口标准.第11部分:14-pin调制器集成的激光二极管发射机 Fibre optic active components and devices -- Package and interface standards -- Part 11: 14-pin modulator-integrated laser diode transmitters
JIS C5952-10-2008 纤维光学有源元件及器件.包装和接口标准.第10部分:SFF MU双重20-pin收发器 Fibre optic active components and devices -- Package and interface standards -- Part 10: SFF MU duplex 20-pin transceivers
JIS C5952-1-2008 纤维光学有源元件及器件.包装和接口标准.第1部分:总则和指南 Fibre optic active components and devices -- Package and interface standards -- Part 1: General and guidance
JIS C8115-2008 住宅照明用荧光灯具 Fluorescent lamp luminaires for residential lighting
JIS C8106-2008 商业、工业和公共照明用荧光灯具 Fluorescent lamp luminaires for commercial, industrial and public lighting
JIS C5953-4-2008 纤维光学有源元件及器件.性能标准.第4部分:吉比特以太网设施用1300nm纤维光学收发器 Fiber optic active components and devices -- Performance standards -- Part 4: 1 300 nm fiber optic transceivers for gigabit Ethernet application
JIS T1704-2008 心肺导管用热交换器 Heat exchanger for heart-lung bypass
JIS T3230-2008 充氧器 Oxygenators
JIS Q9001 ERRATUM 1-2007 质量管理体系.要求.勘误 Quality management systems -- Requirements -- Erratum
JIS K6353 ERRATUM 1-2008 水工工程用橡胶制品.勘误表 Rubber goods for water works -- Erratum
JIS K2501 ERRATUM 1-2008 石油产品和润滑油.中和值测定.勘误表 Petroleum products and lublicants -- Determination of neutralization number -- Erratum
JIS G4321 ERRATUM 1-2007 建筑用不锈钢.勘误表 Stainless steel for building structure -- Erratum
JIS G4305 ERRATUM 1-2007 热轧不锈钢板,片材,带材.勘误表 Cold-rolled stainless steel plate, sheet and strip -- Erratum
JIS G4304 ERRATUM 1-2007 热轧不锈钢板,片材,带材.勘误表 Hot-rolled stainless steel plates, sheet and strip -- Erratum
JIS B8201 ERRATUM 1-2008 固定钢制锅炉.构造.勘误表 Stationary steel boilers -- Construction -- Erratum
JIS A5416 ERRATUM 1-2008 热压处理过的轻量级加气混凝土面板.勘误表 Autoclaved lightweight aerated concrete panels -- Erratum
JIS A1210 ERRATUM 1-2008 利用装填器测定土壤紧实度的试验方法.勘误表 Test method for soil compaction using a rammer --Erratum
JIS K7391-2008 非约束型受潮混合梁的振动阻尼性能的试验方法 Test methods for vibration-damping property in damped composite beam of unconstrained type
JIS T0601-1 ERRATUM 1-2008 勘误表 ERRATUM
JIS D8105 ERRATUM 1-2008 勘误表 ERRATUM
JIS D8101 ERRATUM 1-2008 勘误表 ERRATUM
JIS B8031 ERRATUM 1-2008 勘误表 ERRATUM
JIS K5572 AMD 1-2008 邻苯二甲酸树脂瓷漆(修改件1) Phthalic resin enamel (Amendment 1)
JIS C6485-2008 印制电路用基础材料.纸基、酚醛树脂 Base materials for printed circuits -- Paper base, phenolic resin
JIS K0216-2008 分析化学用技术术语(环境部分) Technical terms for analytical chemistry (Environmental part)
JIS K6217-4-2008 橡胶工业用碳黑.基本特性.第4部分:吸油量值(OAN)和压缩样品吸油量值(COAN)的测定 Carbon black for rubber industry -- Fundamental characteristics -- Part 4: Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
JIS K6217-1-2008 橡胶工业用碳黑.基本特性.第1部分:碘吸收数的测定(滴定法) Carbon black for rubber industry -- Fundamental characteristics -- Part 1: Determination of iodine adsorption number (Titrimetric method)
JIS L1069 AMD 1-2008 天然纤维抗拉强度试验(修改件1) Tensile strength tests of natural fibres (Amendment 1)
JIS H3300-2009 铜及铜合金无缝管 Copper and copper alloy seamless pipes and tubes
JIS X4157-2-2008 信息技术.主题映像.第2部分:数据模型 Information technology -- Topic Maps -- Part 2: Data model
JIS B8367-6-2008 液压汽缸的安装尺寸.第6部分:单杆.10MPa系列、短冲程汽缸(汽缸内径32mm~100mm) Mounting dimensions for hydraulic cylinders -- Part 6 : Single rod -- 10 MPa series, short-stroke cylinders (Bores from 32 mm to 100 mm)
JIS B8367-4-2008 液压汽缸的安装尺寸.第4部分:单杆.25MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径50mm~320mm) Mounting dimensions for hydraulic cylinders -- Part 4 : Single rod -- 25 MPa series, round cover types with welded or threaded flange (Bores from 50 mm to 320 mm)
JIS R1604-2008 高温下精制陶瓷的挠曲强度的测试方法(折断模量) Testing method for flexural strength (modulus of rupture) of fine ceramics at elevated temperature
JIS L0848 ERRATUM 1-2008 勘误表 ERRATUM
JIS L0844 ERRATUM 1-2008 勘误表 ERRATUM
JIS Z8103 ERRATUM 1-2008 勘误表 ERRATUM
JIS K8005 ERRATUM 1-2008 勘误表 ERRATUM
JIS A5001 AMD 1 ERRATUM 1-2008 勘误表 ERRATUM
JIS B8472-2008 蒸汽管道.电磁阀 Steam pipe line -- Solenoid valves
JIS S2071-2008 家用气和燃油加热器的标准使用条件、标准加速模式和试验条件 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater
JIS S0104-2008 消费者用招回公告的条款及其起草 Items and drafting for recall notification for consumers
JIS Z8301-2008 日本工业标准的版面设计和起草用规则 Rules for the layout and drafting of Japanese Industrial Standards
JIS C7506-1-2008 道路车辆用灯.第1部分:尺寸、电和照明要求 Lamps for road vehicles -- Part 1: Dimensional, electrical and luminous requirements
JIS C7506-2-2008 道路车辆用灯.第2部分:性能要求 Lamps for road vehicles -- Part 2: Performance requirements
JIS Z1651-2008 非危险品用柔性中型散货集装箱(FIBCs) Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
JIS T9241-1-2008 残疾人移动用升降机.第1部分:分类和一般要求 Hoists for the transfer of persons with disabilities -- Part 1: Classification and general requirement
JIS K2437-2008 酚(苯酚、邻甲酚、甲酚和二甲苯酚) Phenols (phenol, o-cresol, cresols and xylenols)
JIS A5759-2008 玻璃窗用粘附膜 Adhesive films for glazings
JIS B8342-2008 小型往复式空气压缩机 Small-size reciprocating air compressors
JIS Q14025-2008 环境标志和申报单.III型环境申报单.原则和程序 Environmental labels and declarations -- Type III environmental declarations -- Principles and procedures
JIS C8921-2008 光电器件.第2部分:基准太阳能器件的要求 Photovoltaic devices -- Part 2: Requirements for reference solar devices
JIS A1481-2008 建筑材料产品中石棉的测定 Determination of asbestos in building material products
JIS Z2254 ERRATUM 1-2008 勘误表 ERRATUM
JIS B9961-2008 机械安全.与安全有关的电气、电子和可编程电子控制系统的功能安全 Safety of machinery -- Functional safety of safety-related electrical, electronic and programmable electronic control systems
JIS C7506-3-2008 道路车辆用灯.第3部分:指示灯 Lamps for road vehicles -- Part 3: Miniature lamps
JIS B9960-1-2008 机械安全.机器的电气设备.第1部分:一般要求 Safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
JIS Z8851-2008 室温下PM2.5的取样器 Sampler of PM2.5 in ambient air
JIS B8397-2-2008 液压传动.马达特性的测定.第2部分:起动性 Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
JIS B8397-1-2008 液压传动.马达特性的测定.第1部分:在恒低速和恒压下 Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and constant pressure
JIS C2820-2008 电机用电刷材料的物理性能测定用试验程序 Test procedures for determining physical properties of brush materials for electrical machines
JIS T9241-5-2008 残疾人移动用升降机.第5部分:吊索板 Hoists for the transfer of persons with disabilities -- Part 5: Sling sheets
JIS T9241-4-2008 残疾人移动用升降机.第4部分:导轨式升降机 Hoists for the transfer of persons with disabilities -- Part 4: Rail guide hoists
JIS T9241-3-2008 残疾人移动用升降机.第3部分:固定式升降机 Hoists for the transfer of persons with disabilities -- Part 3: Stationary hoists
JIS T9241-2-2008 残疾人移动用升降机.第2部分:移动式升降机 Hoists for the transfer of persons with disabilities -- Part 2: Mobile hoist
JIS D0202-1988 汽车零件覆膜的通用轨则 General rules of coating films for automobile parts
JIS C8375-1992 大矩形毂型可互换式布线装置的安装框架 Mounting frame for interchangeable wiring devices of large square boss type
JIS G3312-2008 预涂膜热浸镀锌薄钢板和卷材 Prepainted hot-dip zinc-coated steel sheet and strip
JIS C8823-2008 小聚合物电解液燃料电池动力系统的测试方法 Testing methods for small polymer electrolyte fuel cell power systems
JIS C8822-2008 小聚合物电解液燃料电池动力系统的通用安全规程 General safety code for small polymer electrolyte fuel cell power systems
JIS C8821-2008 小聚合物电解液燃料电池动力系统的通用规则 General rules for small polymer electrolyte fuel cell power systems
JIS C8118-2008 管式荧光灯用镇流器.性能要求 Ballasts for tubular fluorescent lamps -- Performance requirements
JIS Z8520-2008 人-机交互作用的人类工效学.第110部分:对话原理 Ergonomics of human-system interaction -- Part 110: Dialogue principles
JIS T6126-2008 牙科铸造用金合金的附加金属 Plus metals for dental casting gold alloys
JIS T7329-2008 医疗用清洗消毒器 Washer sterilizers for medical use
JIS Z4752-2-9-2008 医疗成像部门的评估和常规测试.第2-9部分:稳定性试验.间接放射线透视和间接放射线摄影用设备 Evaluation and routine testing in medical imaging departments -- Part 2-9: Constancy tests -- Equipment for indirect radioscopy and indirect radiography
JIS Z4752-3-5-2008 医疗成像部门的评估和常规测试.第3-5部分:验收试验.计算机X线断层摄影用X射线设备的成像性能 Evaluation and routine testing in medical imaging departments -- Part 3-5: Acceptance tests -- Imaging performance of computed tomography X-ray equipment
JIS Z4751-2-28-2008 医疗电气设备.第2部分:医疗诊断用X射线源组件和X射线管组件的安全用特殊要求 Medical electrical equipment -- Part 2: Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis
JIS Z4751-2-44-2008 医疗电气设备.第2-44部分:计算机X线断层摄影用X射线设备的安全用特殊要求 Medical electrical equipment -- Part 2-44: Particular requirements for the safety of X-ray equipment for computed tomography
JIS T0307-2004 医疗器械.用于医疗器械标签、作标记和提供信息的符号 Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied
JIS C8147-1-2005 灯控制设备.第1部分:一般和安全要求 Lamp controlgear -- Part 1: General and safety requirements
JIS H1631-2008 钛合金.X射线荧光光谱测定分析法 Titanium alloys -- Method for X-ray fluorescence spectrometric analysis
JIS H1611-2008 钛和钛合金.化学分析的通用规则 Titanium and titanium alloys -- General rules for chemical analysis
JIS H1610-2008 钛和钛合金.取样方法 Titanium and titanium alloys -- Sampling methods
JIS C8119-2008 放电灯用镇流器(包括管式荧光灯).性能要求 Ballasts for discharge lamps (excluding tubular fluorescent lamps) -- Performance requirements
JIS C8800-2008 燃料电池动力系统用术语表 Glossary of terms for fuel cell power system
JIS K0808-2008 自动全氮分析器 Automatic total nitrogen analyzer
JIS K0809-2008 自动全磷分析器 Automatic total phosphorus analyzer
JIS C60079-18-2008 爆炸性气体环境用电气设备.第18部分:"m"防护型电气设备的结构、试验和标记 Electrical apparatus for explosive gas atmospheres -- Part 18: Construction, test and marking of type of protection encapsulation "m" electrical apparatus
JIS C60079-15-2008 爆炸性气体环境用电气设备.第15部分:"n"防护型电气设备的结构、试验和标记 Electrical apparatus for explosive gas atmospheres -- Part 15: Construction, test and marking of type of protection "n" electrical apparatus
JIS C60079-2-2008 爆炸性气体环境用电气设备.第2部分: "p"型受压外壳 Electrical apparatus for explosive gas atmospheres -- Part 2: Pressurized enclosure "p"
JIS M8128-2008 矿石中钨的测定方法 Methods for determination of tungsten in ores
JIS A6603-2008 钢棚 Steel sheds
JIS Q0035-2008 参考物质.鉴定用总则和统计原则 Reference materials -- General and statistical principles for certification
JIS C8108-2008 荧光灯用镇流器 Ballasts for fluorescent lamps
JIS B7139-2-2008 立体显微镜.第2部分:立体显微镜的测试 Stereomicroscopes -- Part 2: Testing of stereomicroscopes
JIS B7139-1-2008 立体显微镜.第1部分:立体显微镜的最低要求 Stereomicroscopes -- Part 1: Minimum requirements for stereomicroscopes
JIS K2301-2008 燃料气体和天然气.化学分析和测试方法 Fuel gases and natural gas -- Methods for chemical analysis and testing
JIS E4048-2008 车辆.客车的车体结构.点焊接头的设计方法 Rolling stock -- Body structure for passenger cars -- Design method for spot-welded joints
JIS Z4325-2008 连续监测环境中γ辐射用设备 Equipment for continuously monitoring gamma radiation in the environment
JIS Z4317-2008 放射性惰性气体监测器 Radioactive noble gas monitors
JIS B7139-4-2008 立体显微镜.第4部分:立体显微镜的标记 Stereomicroscopes -- Part 4: Marking of stereomicroscopes
JIS B7139-3-2008 立体显微镜.第3部分:提供给用户的信息 Stereomicroscopes -- Part 3: Information provided to the user
JIS E4047-2008 铁路车辆.车辆底架.焊接接头的设计方法 Rolling stock -- Body frame -- Design methods for welded joints
JIS H1343-2008 镁和镁合金中铅的测定方法 Methods for determination of lead in magnesium and magnesium alloys
JIS H1342-2008 镁和镁合金中锡的测定方法 Methods for determination of tin in magnesium and magnesium alloys
JIS C8832-2008 静态聚合物电解液燃料电池堆的性能试验 Performance test for stationary polymer electrolyte fuel cell stack
JIS C8831-2008 静态聚合物电解液燃料电池堆的安全评估试验 Safety evaluation test for stationary polymer electrolyte fuel cell stack
JIS H0542-2008 镁合金薄板材平均粒度的测定方法 Methods for determining average grain size of magnesium alloy sheets
JIS X0408 ERRATUM 1-2008 勘误表 ERRATUM
JIS T0601-1 ERRATUM 3-2008 勘误表 ERRATUM
JIS K7144 ERRATUM 1-2008 勘误表 ERRATUM
JIS K2501 ERRATUM 2-2008 勘误表 ERRATUM
JIS K2276 ERRATUM 1-2008 勘误表 ERRATUM
JIS K2265-4 ERRATUM 1-2008 勘误表 ERRATUM
JIS K2265-3 ERRATUM 1-2008 勘误表 ERRATUM
JIS K2251 ERRATUM 1-2008 勘误表 ERRATUM
JIS G3464 ERRATUM 1-2008 勘误表 ERRATUM
JIS E5402-1 ERRATUM 1-2008 勘误表 ERRATUM
JIS D2605 ERRATUM 1-2008 勘误表 ERRATUM
JIS C3653 ERRATUM 1-2008 勘误表 ERRATUM
JIS B7613-2008 家用计量器.浴室体重计、儿童体重计和烹饪用秤 Household scales -- Bathroom scales, baby scales and cooking scales
JIS C8826-2008 网状互连的小聚合物电解液燃料电池动力系统的动力调节器用测试方法 Testing methods of power conditioner for grid interconnected small polymer electrolyte fuel cell power systems
JIS C8825-2008 小聚合物电解液燃料电池动力系统的测试和测量技术 Testing and measurement techniques of small polymer electrolyte fuel cell power systems
JIS C8824-2008 小聚合物燃料电池动力系统的环境用测试方法 Testing methods for environment of small polymer electrolyte fuel cell power systems
JIS H4090-1990 铝和铝合金焊接管和管件 Aluminium and aluminium alloy welded pipes and tubes
JIS F8071-2008 船用电气装置.第352部分:电缆的选择和安装 Electrical installations in ships -- Part 352: Choice and installation of electrical cables
JIS Z3201 AMD 1-2008 低碳钢用气焊条(修改件1) Gas welding rods for mild steel (Amendment 1)
JIS K6298-2009 未精制的天然橡胶和未精制的合成橡胶.取样和进一步制备程序 Rubber, raw natural and raw synthetic -- Sampling and further preparative procedures
JIS B5009-2008 冲压模用带圆柱形头和缩减柄的冲头 Punches with cylindrical head and reduced shank for press dies
JIS B1536-3-2008 滚动轴承.滚针轴承的边界尺寸和公差.第3部分:向心滚针和保持架组件 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 3: Radial needle roller and cage assemblies
JIS T8124-2-2008 固体颗粒防护服.第2部分:测定细粒气溶胶向服装内渗漏的试验方法 Protective clothing for use against solid particulates -- Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
JIS T8033-2008 防护服装.液态化学品防护.耐液体渗透物质的试验方法 Protective clothing -- Protection against liquid chemicals -- Test method for resistance of materials to penetration by liquids
JIS T8125-1-2008 手持式链锯使用者用防护服装.第1部分:抗链锯切割试验用飞轮驱动的试验设备 Protective clothing for users of hand-held chain-saws -- Part 1: Test rig driven by a flywheel for testing resistance to cutting by a chain-saw
JIS T9207-2008 轮椅用便携式车轮坡道 Portable ramps for wheelchairs
JIS B8392-7-2008 压缩空气.第7部分:活性微生物杂质含量的试验方法 Compressed air -- Part 7: Test method for viable microbiological contaminant content
JIS B9918-2-2008 清洁室及相关受控环境.生物污染控制.第2部分:生物污染数据的评定和说明 Cleanrooms and associated controlled environments -- Biocontamination control -- Part 2: Evaluation and interpretation of biocontamination data
JIS C60079-10-2008 爆炸性气体环境用电气设备.第10部分:危险场所的分类 Electrical apparatus for explosive gas atmospheres -- Part 10: Classification of hazardous areas
JIS C0364-7-703-2008 建筑物的电气装置.第7-703部分:特殊装置或场所的要求.装有桑拿浴加热器的房间和浴室 Electrical installations of buildings -- Part 7-703: Requirements for special installations or locations -- Rooms and cabins containing sauna heaters
JIS K7129-2008 塑料.薄膜和薄片.水蒸气透过率的测定.仪器法 Plastics --Film and sheeting -- Determination of water vapour transmission rate -- Instrumental method
JIS C60079-1-2008 爆炸性气体环境用电气设备.第1部分:防火外壳"d" Electrical apparatus for explosive gas atmospheres -- Part 1: Flameproof enclosures "d"
JIS A5209-2008 瓷砖 Ceramic tiles
JIS B1536-2-2008 滚动轴承.滚针轴承的边界尺寸和公差.第2部分:拉制的无内环杯形 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 2: Drawn cup without inner ring
JIS K8953-2008 硫酸锌七水合物(试剂) Zinc sulfate heptahydrate (Reagent)
JIS C2570-2-2008 直热式负温度系数热敏电阻.第2部分:分规范.表面安装的负温度系数热敏电阻 Directly heated negative temperature coefficient thermistors -- Part 2: Sectional specification -- Surface mount negative temperature coefficient thermistors
JIS C5101-23-1-2008 电子设备用固定电容器.第23-1部分:空白详细规范.表面安装的金属化聚乙烯苯二甲酸盐薄膜介质直流固定电容器.评定水平EZ Fixed capacitors for use in electronic equipment -- Part 23-1: Blank detail specification -- Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors -- Assessment level EZ
JIS C5101-23-2008 电子设备用固定电容器.第23部分:分规范.表面安装的金属化聚乙烯苯二甲酸盐膜介质直流固定电容器 Fixed capacitors for use in electronic equipment -- Part 23: Sectional specification -- Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
JIS B8392-9-2008 压缩空气.第9部分:通过质量浓度测定水含量的试验方法 Compressed air -- Part 9: Test methods for liquid water content by mass concentration
JIS B8392-8-2008 压缩气体.第8部分:通过质量浓度测定固体颗粒含量的试验方法 Compressed air -- Part 8: Test methods for solid particle content by mass concentration
JIS E4031-2008 铁路车辆设备.冲击和振动试验 Rolling stock equipment -- Shock and vibration tests
JIS K2246 ERRATUM 1-2008 勘误表 ERRATUM
JIS G3192 ERRATUM 1-2008 勘误表 ERRATUM
JIS C60068-2-27 ERRATUM 1-2008 勘误表 ERRATUM
JIS C8712 ERRATUM 1-2008 勘误表 ERRATUM
JIS C8708 ERRATUM 1-2008 勘误表 ERRATUM
JIS B8201 ERRATUM 2-2008 勘误表 ERRATUM

 

4000余份国内外译文版规范目录免费下载:http://www.stdbook.org
我司门户:http://www.stdbook.org/
淘宝网店:http://shop58629444.taobao.com/

文章为作者独立观点,不代表阿里巴巴以商会友立场。转载此文章须经作者同意,并附上出处及文章链接。
0 313